Category Archives: Diamond Cut Alloys

Are your wheels’ aligned properly?

DSC_6078Wheel alignment is not probably one of the first things that you will want to think about when it comes to servicing your car. However, wheel alignment affects your ability to enjoy driving to the max as you will have to concentrate on adjusting to the pull. If your wheels have not been aligned recently, you can expect the car might not move in a straight line and it pulls you to the side.

If you notice your car does not move in a straight line it can be a bit scary but don’t panic as it is most likely something simple like wheel alignment or too much or too little air pressure. The old-fashioned method of ‘tracking’ where only the front two wheels are aligned was fine before technology advanced, but today you need to have your wheel alignment done properly and professionally.

Four wheel alignment is miles better than tracking because the former type of alignment takes into consideration the changes in how steering and suspension work in modern cars. Four wheel alignment will look at least 12 angles and contrast them with information from the manufacturer of the car. Adjustments are then made to ensure that the wheels are in the same position compared to when they left the factory. Wheel alignment is critical if you want optimal performance while driving your car.

 

At Diamond Alloys, we offer wheel alignment for FREE when you book a set of 4 wheel for refurbishment with us. Give us a call on 0845 370 8881 now!

 

 

STAFF INTERVIEW WITH OUR DIAMOND ALLOYS SALES ADMIN ASSISTANT

1. How long have you been working at Diamond Alloys?

I’ve been working for Diamond Alloys for over 3 months and I already feel part of the team!

 

2. What do you do at Diamond Alloys?

I work as a Sales Admin Assistant. I help with the day to day running of the sales office like taking bookings, answering phones and contacting trade accounts.

 

3. What is a typical day at Diamond Alloys like?

It is very busy answering the phones, taking bookings and dealing with customers.

 

4. What do you love about working in customer service?

I enjoy dealing with customers on a day to day basis which can be very fun and satisfying when the customer is happy.

 

5. What makes good customer service?

Great personality, patience, understanding, efficient, quick response.

 

6. What are the most common questions customers ask?

We often get asked is we provide a mobile service? We generally advise customers that we do not provide a mobile patching service. You cannot get a Diamond Cut repair done by a mobile service so you need to bring it into a specialist alloy wheel refurbishment centre like Diamond Alloys. For a painted finish we also advise the whole wheel is refurbished as this will give a better finish and a longer lasting result.

 

Customers also ask do we repair cracks and buckles? Yes we do! Prices start fromt £60 + VAT for a buckle and £65 + VAT for a crack repair. 

 

7. Which is the most popular service customers ask about?

Diamond cut is the most popular, we are specialists at this and have our own lathe on site.

 

8. What extras can customers look for at Diamond Alloys that competitors don’t offer?

We offer a great service which includes parking, tyre fitting with balance – all at no extra cost.

 

9. How does it help to work closely with the technicians?

It helps a lot as we can always go to them with any questions we may have about wheels. I have learnt a lot since I’ve been here and this knowledge helps me talk to customers with confidence and ensures they get the finish they want.

 

10. What’s the workshop atmosphere like?

Overall it is a great place to work with great people.

 

11. What motivates you to do a good job?

My kids motivate me from the moment I get up in morning and throughout the day.

 

12. Tell us about your life out of the office, what do you like doing in your spare time?

I love spending time with my kids, to do things with them. The time I don’t spend with them I am at work, I’m at the gym or out with the girls.

 

13. If you won the lottery, what would you do?

ohhhhh….First thing book myself and kids an expensive holiday. Then buy a house plus car -of course- get my wheels done at Diamond Alloys and invest the rest.

What you need to know about winter tyres

IMG_0134-2Winter tyres are a legal requirement in some European countries yet at the same time. However, we recommend you don’t use them during the summer because they are designed specifically for the challenging winter roads. They are made from a rubber compound that features silica and their tread pattern is meant to be flexible when it is cold. This flexibility gives the tyres the power to brake well and have good traction at the same time. The UK is one of the only countries in Europe where winter tyres are not compulsory, partly because some parts of the country don’t experience harsh winter weather and it is not cost effective at the moment to roll out winter tyres across the country. However, with snow and extreme weather always a threat you may wish to consider winter tyres for your car.

Should I consider getting winter tyres?
This might depend on your lifestyle, it could just make good sense as the season changes and of course can depend on your location. For example, if you live in a secluded area, harsh winter weather can take a toll on your car especially if it takes a long time to reach a mechanic, so it might be good to be well prepared for the worst road conditions.

Another benefit of buying winter tyres is if you rely on usuin your car a lot for work or for transporting your family and don’t have alternative transportation options. It will give you peace of mind that you can be safe with winter tyres. You don’t want to put your summer tyres through endless stress so choosing winter tyres could alse be cost effective.

One of the things to remember about winter tyres is they have to be fitted in sets of four. You can’t fit only one because that will impact on the stability of the car itself. If you want to compromise, you could get all season tyres. These tyres have a high amount of silica which is good for the low temperature however you should remember they are still not as good as the top specialist tyres in the market, so choose what is best for your own needs.

Do I have to tell my insurer?
Usually, you don’t need to tell your insurer that you are planning to use winter tyres but you should be aware that you will need to go at lower speeds because the speed index will be lower. When you get winter tyres, you should also have two sets of summer tyres as well so that you can keep with the European guidelines that everyone follows.

 

Mercedes AMG Alloy Wheels

Our well experienced technicians offer a premium range of services which bring your damaged alloy wheels back to life. Pictured below our latest alloy wheels which have just come out from our Wheel Refurbishment Centre. Have a look at these Mercedes AMG alloy wheels and you will understand why our Diamond cut service is so popular!

Our Diamond Cut process is a very precise process which offers the finest finish for your alloy wheels, only removing a thin layer of damaged metal to restore the look of your wheel. Diamond cut alloy wheels do need specialist care so we advise you read our tips to keep them in top condition.

 

Although Diamond cut is our most popular alloy wheel refurbishment service, standard refurbishment and bespoke finish services are also very desired finishes.

 

Not only we can refurbish BMW alloy wheels, Ferrari alloy wheels, Lamborghini alloy wheels, Mercedes alloy wheels and many others but we are often used by main vehicle dealerships, body shop repair and leasing/car hire companies for their alloy wheel repair work.

 

Contact us at 0845 370 8881 now to see what our technicians can do for you!

 

 

Black & Gold Lamborghini

Lustrous and gilded – these are two words that can define this stunning Black and Gold colour combination; take a look in closer detail. Let’s face it, the Lamborghini Aventador is basically fool proof when it comes to stunning looks and breathtaking design, even without a lot of modifications. SR Auto Group got their hands on this Aventador and fitted PUR 2WO RS monoblock alloys.

These alloys are staggered with 20”/21” inches in the front and rear. They are finished in Monaco Gold which provides a bold contrast against the glossy black exterior of the cars bodywork. Sometimes, it is the small details that can make something big look even better. This gold styling does just that for this Raging Bull.

As we have seen a lot recently in our own alloy wheel repair centre, Gold is definitely on trend and have an attractive appeal, If you want to give your car some glam with a gold finish, call us on 0845 370 8881 now!

Anthracite PURs on a Lamborghini Murcielago

Whenever PUR wheels are fitted onto a supercar, they always make the car look extra special. This Lamborghini Murcielago in Grigio was given the PUR treatment.

The specialist put staggered 19”/20” alloys in the front and rear finished in anthracite. The alloys are 8IGHT design monoblock alloys with 5-spoke design. There is a reduction to the weight of the cars because the alloys are lightweight. The brakes of the Murcielago pop from the exterior alongside the alloys. With strong brakes and definite alloys, this Grigio Murcielago makes its mark. With PUR wheels, you can never really go wrong and that’s clearly what this owner thinks too.

We really like the anthracite finish on these alloy wheels and you can get this kind of look with a bespoke finish. Give us a call on 0845 370 8881 and we will be happy to advise what we can do for your alloy wheels.

Don’t forget our Facebook competition..you could win a voucher which worth £50 OFF any wheel online canadian pharmacy refurbishment, simply like our Facebook Page.

 

 

Wonderful Feedback from our Latest Happy Customer

At Diamond Alloy we offer a full range of alloy wheel repair and refurbishment services for motorbike and car wheels.

 

Our skilled technicians have all the necessary experience in the appropriate care and maintenance processes required to refurbish alloy wheels so it is easy for us to cater for unique and different requests.

 

We are always very happy to help with motorbike wheel repairs so when Josh contacted Diamond Alloys to refurbish the alloy wheels of his motorbike we were happy to help advise.

 

Josh was so pleased with his refurbished alloy wheels and our service that he said “I came in the other day with my motorcycle wheels that I needed acid removal and shot blasted. I would like to point out that the job you guys did was brilliant and the wheels came out really good thank you very much. Also i found your receptionists very polite and when it came to calling me back they did exactly that. As a business your place is very professional fair priced and clean compared to other tyre/alloy companies. I will defiantly be recommending diamond alloys to my friends. Once again many thanks.”

 

We love hearing from our customers and how happy they are with their refurbished alloy wheels so make sure to leave us a comment on our feedback page.

 

If your alloy wheels need a new look, give us a call on 0845 370 8881 and our technicians will happy to help you.

Skoda’s superpram is turning heads

First, we have supercars and now, there are superprams! Skoda has unveiled its all terrain Mega Man-Pram which features all terrain tyres and hydraulic suspension. Skoda sees this man-pram as the ultimate baby carrier which is fit for a king. It is supersized and it commands attention, especially judging from the pictures of the Man-Pram which have now gone viral all over the Internet.

The inspiration for the Man-Pram was to create a car-like feel to every day products. This is why a pram was chosen and judging from the Man-Pram’s proportions, Skoda’s designers and engineers took this project seriously.

The Man-Pram is the companion to the Octavia vRS from Skoda. The Man-Pram came to be because of research done into how fathers deal with
having children. A survey of around 1,000 fathers found that the majority of them would spend more money on prams if there was one stylish enough for them. This is why the Man-Pram has these gigantic 20” alloys that do more than just grab attention.  In addition to alloys, it has high-specification brakes and wing mirrors.

Talk about luxury modifications, this is the pram for men who love supercars and want this aesthetic injected into the prams for their children. We can’t promise we can help refurbish your pram, but our technicians are on hand to offer great advise on your alloy wheels. Give us a call on 0845 370 8881 now!

Staff Interview with our Diamond Cut Specialist Kevin

1. How long have you been working at Diamond Alloys?
I’ve been working for Diamond Alloys for two months and I already feel part of the team.

 

2. What did you do before?
I was a delivery driver for a furniture company.

 

3. Why did you decide to get into the motor industry?
I have always had an interest in motor vehicles.

 

4. What do you specialise in?
I specialise in Diamond Cutting alloy wheels.

 

5. What is a lathe?
It is a large piece of machinery specially designed for Diamond Cutting alloy wheels. Basically it precision cuts off a very thin layer of the alloy, just enough to remove any damage done by kerbing.

 

6. What specialist training have you had for using a lathe?
Before staring at Diamond Alloys I had two days intense training which allowed me to gain the expertise I needed to deal with any cut required,  these are specialist skills so the training was essential.

 

7. Why is our Diamond Cut finish so popular?
It is a special and unique finish and very popular thanks to the amazing finished effect it creates. I believe a Diamond Cut finish is the best an alloy can get!

 

8. What do you recommend customers should do to keep their alloy wheels shinning after a diamond cut finish?
I would recommend they clean each alloy at least once a week with warm soapy water, avoid using acidic or chemical cleaners and polish. Avoiding acidic cleaners is important because they affect the condition of your wheels, which could result in you having to have more refurbishments than actually needed.

 

9. Why should customers avoid a mobile repair service?
Because they only touch up the wheels which means they just repair the damaged area. In fact you cannot get a Diamond Cut repair done by a mobile repair company, so you need to bring it into a specialist alloy wheel repair company like Diamond Alloys.

 

10. What motivates you to do a good job?
I take pride in my work and I am very self-motivated.

 

11. What part of your job you enjoy most?
Meeting a happy customer! Knowing that they are pleased with the work that Diamond Alloys have done.

 

12. Are you a big car fan?
I get excited about cars so I guess you could say that I am.

 

 13. If you could drive any car, what would it be, where could you drive it and who would be your passenger?
A Ferrari FF and it wouldn’t matter where I drove it as long as I had a gorgeous lady with me. Not too picky at the moment.

 

14. What do you do in your spare time?
Relax, meet friends and family.

 

15. Do you have any ambitions outside work?
When I was a child I always wanted to be a professional footballer…a million miles away from alloy refurbishment, I know.

 

16. What are three things you can’t live without?
Food, drink and Oxygen…I am not really materialist!

 

17. What are your alloy wheels like?
I don’t have a car at the moment. Due to where I live it is easier for me to use public transportation oppose to driving.

 

Check out some of our latest Diamond Cut Alloy Wheels. You can also mix finishes but opting for a painted inner and diamond cut lip like we have pictured below on the split rim alloy wheel refurbishment.

 

 

Subaru Impreza with Gold finish

Refurbishing your alloy wheels can include the use of several colours and one colour which is fast becoming trendy for alloy wheels is gold. We have seem a marked increase in  requests for a gold finish, not only for car alloy wheels but also for motor bike alloy wheels. It seems at the moment everyone is going for Gold!

 

Our latest customer came into our wheel refurbishment centre last week with his very specific request for a new gold look for the alloy wheels on his Subaru Impreza. Take a closer look at the before/after picture we took below and you will be impressed by the result! It really does show how a simple change in colour can give a really impressive new look to your alloy wheels. If you don’t like gold, then just use your imagination. We can colour match to your car, even add a glitter effect, it really is as easy as just telling us what you wish to achieve.

 

It was an absolute pleasure to see our customer’s reaction when presented with the finished results of his gold alloy wheels refurbishment. Definitely on trend, these alloy wheels have an attractive appeal and give the Subaru Impreza a rally appearance.

 

If you want to give your car some glam with a gold finish, call us on 0845 370 8881 now!

 

At Diamond Alloys, we offer a variety of different techniques, including a bespoke alloy refurbishment, standard refurbishment and our most popular Diamond Cut service. Don’t forget, have all 4 wheels refurbished at the same time and not only get a set that perfectly match in colour and finish, but you also get a better price! Check out our prices here!